Smoke odor lingering weeks after the fire
We remove the source first, then treat with hydroxyl generators and ozone, seal framing with Fiberlock smoke sealant primer, and verify with a room-by-room odor check before we call the job done.
When a kitchen flare-up or electrical fire leaves your rental full of soot and smoke, Tenant Fire Damage Cleanup in SUNLAND, California gets you back to normal fast. We handle renter fire damage restoration in SUNLAND for tenants, landlords, and property managers, working directly with insurance and documenting everything from charred framing to smoke-damaged furniture. Call (833) 929-6186 and we roll a crew the same day.

Tenant Fire Damage Cleanup in SUNLAND, California is a specialized restoration service that removes soot, smoke residue, and fire-damaged materials from a rented home or apartment, then deodorizes and rebuilds so the unit is safe to live in again. Our IICRC Fire and Smoke Restoration Technician (FSRT) crew starts with a thermal imaging camera and moisture meter walkthrough to map hidden heat damage and water from firefighting before any demolition begins.
Renters in SUNLAND face a specific squeeze: the landlord owns the structure, the tenant owns the contents, and both need the unit habitable again quickly. We sort that out on day one, separating structural fire damage from fire-damaged furniture and personal belongings so nothing gets thrown out that can be restored. If you need professional tenant fire cleanup near me SUNLAND, we handle the paperwork, the pack-out, and the smoke odor lingering in closets and HVAC ducts.
Every tenant fire loss is different, but the core scope is consistent. Here is what is included in a standard Tenant Fire Damage Cleanup in SUNLAND, California, and what gets priced separately after the initial walkthrough.
We secure the unit within hours of your call, covering broken windows, doors, and roof damage from fire with plywood and tarps. This prevents weather intrusion and theft while the claim and scope are being worked out.
HEPA vacuuming, chemical sponge cleaning, and surface-specific degreasers on walls, ceilings, cabinets, and fixtures. We pull baseboards and check cavities so hidden soot residue on surfaces does not come back through the paint.
Salvageable furniture, clothing, and electronics are inventoried, packed out, cleaned, and stored. Fire-damaged furniture restoration is included where the item can be saved, and the inventory protects both tenant and landlord in the claim.
Air scrubbers, hydroxyl generators or ozone generators, and charcoal odor absorbers handle the airborne smoke. Exposed framing and new drywall get smoke sealant primer and encapsulant so odor cannot migrate back into the living space.
Firefighting water is extracted and framing is dried with industrial dehumidifiers and air movers, monitored daily with moisture meters. This is the step that prevents mold growth after fire from becoming a second claim.
Drywall, insulation, lumber, plywood, and roofing shingles are replaced by our CSLB-licensed crews, then taped, textured, and painted to match. Final walkthrough includes a moisture reading and a smoke odor check before sign-off.
We secure broken windows, doors, and roof damage from fire within hours so the unit is not open to weather or theft. A project manager meets you on site, documents the loss with photos and moisture readings, and gives you a written scope before any work starts. Most board-ups take 1 to 3 hours.
Crews HEPA-vacuum ceilings, walls, and cavities, then hand-clean soot residue from surfaces using chemical sponges and degreasers matched to the surface. We pull charred drywall and insulation with a drywall saw and pry bar, bag it, and haul it out the same day so the unit starts breathing again.
Firefighting water hides in subfloor and wall cavities. We extract standing water, set industrial dehumidifiers and air movers, and monitor with moisture meters until framing reads dry, usually 3 to 5 days. If mold growth after fire is found, we treat it under our CDPH mold certification protocol.
After demolition and cleaning, we run air scrubbers with HEPA filtration, then hydroxyl generators or ozone generators depending on occupancy. Smoke sealant primer and fire retardant coatings go on exposed framing and new drywall so odor cannot bleed back through the finish coat.
We hang drywall, tape, texture, paint, and reset trim, insulation, and fixtures so the unit matches the rest of the building. Final walkthrough includes a smoke odor check, a moisture reading, and a punch list signed by tenant and landlord. Most full tenant units are back in service in 2 to 4 weeks.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Maps hidden heat damage in walls and ceilings and finds water from firefighting that a visual inspection would miss. We scan every room before demolition so the scope is accurate.
Captures fine soot and smoke particles instead of pushing them around. Air scrubbers run continuously during demolition to protect adjacent units and the crew.
Neutralizes smoke odor at the molecular level. Hydroxyl units run in occupied-adjacent spaces; ozone is used in sealed, unoccupied units with proper clearance times.
Dries framing and subfloor after firefighting water. We monitor with moisture meters daily until readings match dry standard.
Creates pressure differentials to keep soot and dust from migrating into unaffected rooms or neighboring units during demolition and cleaning.
Controlled demolition of charred drywall, insulation, and trim. We cut clean lines so the rebuild matches existing construction and patching is minimal.
Verifies dry standard in framing before rebuild. No drywall goes back up until readings confirm the cavity is dry and mold risk is closed out.
A grease fire spread from the stove to the upper cabinets in a 900-square-foot rental. Soot coated the kitchen, living room, and hallway ceiling; the microwave and range hood were melted; and the unit smelled of burned grease three days later.
Crews HEPA-vacuumed and degreased every surface, removed the charred upper cabinets, replaced drywall on two walls, and ran hydroxyl treatment for 48 hours. The tenant moved back in on day 9, and the final odor check passed with no detectable smoke smell.
An electrical fire in a bedroom of a four-unit building melted wiring and charred framing behind the drywall. Smoke traveled into two adjacent units through shared attic space, and the property manager had three angry tenants and one uninhabitable unit.
We contained the damaged unit with negative air machines, cleaned and deodorized the adjacent units in 3 days, and rebuilt the bedroom with new lumber, insulation, drywall, and paint. The damaged unit was re-rented 26 days after the fire.
A bedroom fire in a hillside rental left the tenant's furniture, clothing, and electronics covered in soot. The tenant assumed everything was a total loss and had already started a replacement claim with renters insurance.
We packed out 47 items, cleaned and deodorized the furniture and textiles, and restored a wood dresser and two nightstands through furniture restoration. The contents claim dropped by roughly $6,000 compared with full replacement.
A fire in a rental creates problems that go well beyond the burn area. These are the ones we hear about most from tenants and landlords in SUNLAND, and how we handle each one.
Ask a pro →We remove the source first, then treat with hydroxyl generators and ozone, seal framing with Fiberlock smoke sealant primer, and verify with a room-by-room odor check before we call the job done.
Our crews HEPA-vacuum first, then hand-clean with chemical sponges and degreasers matched to each surface. We pull baseboards and check cavities so the residue is gone before primer goes on.
We extract standing water the same day, set industrial dehumidifiers and air movers, and monitor with moisture meters until framing reads dry. If mold is present, we treat it under our CDPH mold certification protocol.
We document the loss in one visit, separate tenant contents from landlord structure, and bill both carriers directly. Both parties get the same Xactimate scope, which ends the finger-pointing and gets work started.
Most tenant fire damage cleanup jobs in SUNLAND run $2,800 to $12,500 in 2026, with a typical one-bedroom apartment around $4,500 to $7,000. Cost depends on square footage affected, whether walls and insulation must be removed, contents pack-out volume, and how far smoke traveled through the HVAC system. We provide a written scope before work begins, and most tenant losses are covered by the landlord's policy or the renter's insurance.
In most SUNLAND rentals, the landlord's property insurance pays for structural cleanup and rebuild, while the tenant's renters policy covers contents and temporary housing. Fault rarely changes who pays first; it changes who the insurers pursue afterward. We document the loss so both policies can be filed cleanly, and we bill carriers directly so you are not fronting the full cost out of pocket.
We do. Fire Damage Restoration Sunland handles renter fire damage restoration SUNLAND CA 24/7, including emergency board-up, soot and smoke removal, contents pack-out, deodorization, and structural rebuild. We are IICRC FSRT and OCT certified, EPA Lead-Safe Certified, and CSLB-licensed, and we work directly with tenants, landlords, and property managers throughout the Sunland-Tujunga area.
Emergency board-up and soot removal start the same day, and the cleaning and deodorization phase typically takes 3 to 7 days for an apartment. If drywall, insulation, or framing must be replaced, the full rebuild usually runs 2 to 4 weeks depending on permit timing with the city. We give you a written schedule after the initial walkthrough so you and your landlord can plan temporary housing.
Soot etches deeper and smoke odor sets harder every hour a rental sits untreated. Call (833) 929-6186 for same-day Tenant Fire Damage Cleanup in SUNLAND, California, with a written scope, direct insurance billing, and a crew that has restored rentals across the Sunland-Tujunga area since 2022.
Call Now (833) 929-6186 →Call (833) 929-6186 any hour of the day or night and a real person picks up. We dispatch crews 24/7 across SUNLAND and the surrounding foothills, and most calls get a technician on site within 60 to 90 minutes. If you prefer email, send photos and your address to info@firedamagerestorationsunland.com and we will follow up the same day.