Source-level smoke odor elimination for Sunland homes and businesses

Odor Removal After Fire in SUNLAND, California That Actually Clears the Air

Odor Removal After Fire in SUNLAND, California starts with finding where the smoke soaked in, not masking it. We use thermal imaging cameras, air scrubbers and hydroxyl generators to pull soot gases out of drywall, insulation and framing, then seal what remains. If your kitchen, attic or garage still smells like a campfire weeks after the flames were out, call (833) 929-6186 and we will trace the source the same day.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Professional Odor Removal After Fire in SUNLAND
Careful work. Honest options.
About this service

What Odor Removal After Fire in SUNLAND, California Really Involves

Odor Removal After Fire in SUNLAND, California is the process of locating and neutralizing smoke residue that has penetrated building materials, not just the air. Smoke gases from a kitchen or electrical fire push into drywall pores, insulation batts, plywood sheathing and HVAC ducts, then cool and settle as oily soot. We map those deposits with a thermal imaging camera and moisture meter, HEPA-vacuum loose residue, and treat the surfaces with an encapsulant or smoke sealant primer so the smell cannot off-gas back into the room.

In SUNLAND, the problem gets worse fast. Foothill winds push smoke through attic vents and roof damage, and the dry, hot air bakes odor compounds into lumber and thermal insulation. Homes along Sunland Boulevard Corridor and McGroarty Terrace often have older plaster and unsealed crawlspaces that trap smoke for months. That is why so many residents search for smoke odor elimination services SUNLAND CA long after the fire trucks have left, and why we treat the structure, the ductwork and the contents as three separate jobs.

  • ✓ Odor Gone at the Source
  • ✓ Soot Stains Stopped
  • ✓ HVAC Smell Cleared
  • ✓ Insurance-Ready Documentation
What's included

What Our Odor Removal After Fire Service Includes

Every job includes source tracing, soot removal, air treatment, sealing and a final verification walkthrough. We quote the whole scope up front so you know what the number covers before we start. Contents cleaning, HVAC duct replacement and structural rebuild are priced as separate line items when the loss requires them.

✓

Source Tracing and Scope

A thermal imaging camera and moisture meter walkthrough identifies every affected cavity, duct run and material. We tag rooms, photograph readings and build the scope in Xactimate. This takes 45 to 90 minutes and gives you a written number before any equipment is placed.

✓

Soot and Residue Removal

HEPA vacuuming, chemical sponge work and surface wiping on ceilings, walls, framing and hard contents. We match the cleaner to the residue type, dry soot versus protein smoke, and pull charred material with a pry bar and drywall saw where needed.

✓

Air Treatment and Deodorization

Air scrubbers with HEPA filtration plus a hydroxyl generator or ozone generator, run 24 to 72 hours depending on severity. Ozone is used only in unoccupied spaces and off-gassed before re-entry. This is the stage that does the actual smoke odor elimination.

✓

Sealing and Encapsulation

Smoke sealant primer and encapsulant applied to framing, drywall and exposed substrate so odor compounds cannot off-gas back into the room. We use Fiberlock-compatible products and document the application for your file.

✓

Final Verification and Documentation

We run the HVAC, re-check readings and walk every room with you before demobilizing. You receive photo documentation, the Xactimate file and the 1-year workmanship warranty on the odor treatment.

How it works

Our 5-Step Odor Removal After Fire Process

01

Emergency Assessment

We arrive, secure the structure and walk the loss with you. A thermal imaging camera and moisture meter tell us where smoke and firefighting water traveled, and we tag affected rooms, contents and duct runs. This first visit takes 45 to 90 minutes and ends with a written scope and a start date.

02

Soot and Residue Removal

Technicians HEPA-vacuum ceilings, walls and framing, then wipe hard surfaces with the right cleaner for the residue type, dry soot versus wet protein smoke. Charred framing and melted wiring get pulled with a pry bar and drywall saw so the new material goes onto clean substrate. Most rooms take one to two days.

03

Deodorization and Air Treatment

We set air scrubbers with HEPA filtration and run a hydroxyl generator or ozone generator, depending on occupancy and material sensitivity. Ozone is used only in unoccupied spaces and off-gassed before anyone returns. This stage runs 24 to 72 hours and is where the actual smoke odor elimination happens.

04

Sealing and Structural Repair

Once readings are clean, we apply smoke sealant primer to framing and drywall, then rebuild with new drywall, insulation and lumber. Roof damage from fire and water damage from firefighting get addressed in the same scope so you are not calling a second contractor. Structural repair typically runs 3 to 10 days.

05

Final Verification Walkthrough

We run the HVAC system, re-check readings and walk every room with you before demobilizing. If any room still reads high, treatment continues at no extra charge. You get the final photo documentation and the Xactimate file for your records, plus a 1-year workmanship warranty on the odor treatment.

Tools & methods

Tools and Methods We Use for Smoke Odor Elimination

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal Imaging Camera

Finds temperature differences that reveal smoke travel inside wall cavities, ceilings and duct chases. We use it on every assessment before quoting treatment.

Air Scrubber with HEPA Filtration

Filters airborne soot particles down to 0.3 microns and keeps them from settling back onto cleaned surfaces. Run continuously during the deodorization stage.

Hydroxyl Generator

Oxidizes odor molecules in occupied or sensitive spaces without the off-gassing concerns of ozone. Our default choice for homes with pets, plants or occupants on site.

Ozone Generator

Used only in unoccupied spaces for severe odor, with a full off-gas period before re-entry. Effective on deep smoke saturation in framing and subfloor.

Negative Air Machine

Creates pressure differentials that pull smoke residue out of cavities and duct runs instead of pushing it into clean rooms. Critical on HVAC contamination jobs.

HEPA Vacuum and Moisture Meter

HEPA vacuuming removes loose soot before wet cleaning; the moisture meter verifies firefighting water is dry before deodorization begins.

Industrial Dehumidifier and Air Mover

Dries firefighting water from framing and subfloor so mold growth after fire does not start under the odor treatment.

Real results

Before and after.

Kitchen Fire Odor, Sunland-Tujunga Bungalow

Before

A grease fire was extinguished quickly, but three weeks later the whole house smelled of burnt cooking oil. Cabinets, ceilings and the HVAC plenum were coated with a thin protein smoke film that reactivated every time the heater ran.

After

We degreased and HEPA-vacuumed all surfaces, ran hydroxyl treatment for 60 hours and sealed the kitchen walls. Final readings were neutral in every room, and the homeowner avoided replacing the cabinets.

Attic Fire, Haines Canyon Two-Story

Before

An attic fire burned through roof sheathing and saturated the insulation. Smoke traveled down through closet walls, and the upstairs bedrooms smelled like charred wood for two months. The roof had a 12-foot section of damage from fire and water.

After

We removed 640 square feet of insulation, treated framing with smoke sealant primer, ran air scrubbers for 72 hours and rebuilt the roof section with new shingles. All bedrooms read neutral on the final walkthrough.

Apartment Fire, Foothill Boulevard District

Before

A bedroom fire in one unit pushed smoke through the shared HVAC into two neighboring apartments. Tenants reported odor in closets and bathrooms, and the property manager needed documentation for three separate insurance carriers.

After

We tested all adjacent units with a thermal imaging camera, treated the two affected units with air scrubbers and hydroxyl generators, cleaned the shared plenum and documented each unit separately. All three passed verification in 11 days.

Problems we solve

Smoke Odor Problems We Solve for SUNLAND Homes

Most repeat odor calls come down to one of these four problems. Each one has a fix, and none of them involve masking the smell with fragrance.

Ask a pro →
01

Smoke odor lingering months after the fire

We trace the source with a thermal imaging camera, clean the affected cavities and HVAC plenum, then seal the framing with smoke sealant primer. Most lingering-odor jobs resolve in 3 to 5 days once the actual source is treated instead of covered.

↗
02

Soot residue bleeding through fresh paint

We HEPA-vacuum and chemically clean the surface first, then apply a fire retardant coating and smoke sealant primer before any finish coat. That sequence is why our repainted surfaces do not bleed, even in older Sunland homes with plaster walls.

↗
03

Mold growth after fire from firefighting water

We dry the structure with industrial dehumidifiers and air movers, verify with a moisture meter, and treat affected areas under our CDPH Mold Certification protocols before deodorization. Handling moisture first keeps the odor treatment from failing.

↗
04

Smoke damage to the HVAC system

We pull the blower, clean the plenum and treat duct runs with a negative air machine setup. If duct replacement is needed, we scope it in Xactimate so your carrier sees the line item. This step alone fixes roughly 4 out of 10 repeat-odor calls.

↗
Proof you can check

Licensed, Certified and Warrantied

✓
IICRC Fire and Smoke Restoration Technician (FSRT)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC Odor Control Technician (OCT)Institute of Inspection, Cleaning and Restoration Certification
✓
California Contractors State License Board (CSLB) LicenseCalifornia Contractors State License Board
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
✓
Xactimate Certified EstimatorVerisk
Good questions

Frequently Asked Questions About Odor Removal After Fire in SUNLAND

(833) 929-6186 →

Most residential jobs run $1,200 to $4,800 in 2026, depending on square footage and how deep the smoke traveled. A single bedroom with contained damage sits near the low end; a whole-house loss with HVAC contamination and attic involvement pushes toward the top. Insurance often covers the deodorization when it is part of a covered fire claim, and we build the scope in Xactimate so your adjuster can process it quickly.

We do, and we are local to the foothills. Fire Damage Restoration Sunland has served SUNLAND since 2022, with crews dispatched from the Sunland Boulevard Corridor area to Sunland-Tujunga, Shadow Hills and La Tuna Canyon. Call (833) 929-6186 and we will confirm a same-day or next-morning assessment window, usually within 2 to 4 hours for emergencies.

A contained room typically takes 3 to 5 days from assessment to final walkthrough. Whole-house jobs with HVAC treatment and structural repair run 2 to 4 weeks. The deodorization stage itself is 24 to 72 hours of equipment run time; the rest is soot removal, sealing and rebuild. We give you a day-by-day schedule before we start so you can plan around it.

Yes, when the source is treated rather than covered. Complete removal means pulling soot from wall cavities, cleaning the HVAC system and sealing framing with a smoke sealant primer. In our experience, roughly 9 out of 10 jobs reach a neutral smell on the first pass. The rest need a second treatment cycle, which we handle under the 1-year workmanship warranty at no additional cost.

Ready when you are

Get Odor Removal After Fire in SUNLAND, California Started Today

Smoke odor gets harder to remove every day it sits. Call (833) 929-6186 and we will schedule a same-day assessment, trace the source and give you a written scope before any equipment goes in. Licensed, insured and warrantied for 1 year.

Call Now (833) 929-6186 →
Request an appointment

Contact Our SUNLAND Fire Damage Restoration Team

Call (833) 929-6186 any hour of the day or night and a real person picks up. We dispatch crews 24/7 across SUNLAND and the surrounding foothills, and most calls get a technician on site within 60 to 90 minutes. If you prefer email, send photos and your address to info@firedamagerestorationsunland.com and we will follow up the same day.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186