Fast soot removal, odor control, and structural cleanup for Sunland homes

Smoke Damage Restoration in SUNLAND, California

Smoke Damage Restoration in SUNLAND, California is the work of pulling soot out of every surface and stopping the odor at its source. We handle houses and businesses across Sunland-Tujunga, from kitchen fires to attic smoke that soaked into insulation. Our team brings air scrubbers and thermal cameras, documents everything for your claim, and gets you back inside safely. Call (833) 929-6186 for smoke cleanup in SUNLAND.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Quality Smoke Damage Restoration in SUNLAND
Careful work. Honest options.
About this service

What Smoke Damage Restoration in SUNLAND, California Involves

Smoke Damage Restoration in SUNLAND, California is the process of removing soot, neutralizing odor, and repairing the surfaces smoke has penetrated after a fire. Smoke travels farther than flames. It pushes through drywall seams, settles into insulation, and coats the inside of your HVAC system with a fine acidic film. Left alone, that residue etches metal, stains paint, and keeps the smell alive for years. We test surfaces with a moisture meter and thermal imaging camera, then build a room-by-room cleaning plan before we touch a wall.

Homes in Sunland-Tujunga sit close to the foothills, where dry Santa Ana winds push smoke fast through attics and crawlspaces. That means a small kitchen fire can leave odor in bedrooms on the other side of the house. If you search for professional smoke cleanup near me SUNLAND, you need a crew that understands how smoke moves through this building stock. We use negative air machines and HEPA vacuums to trap particles instead of pushing them around, and we treat the HVAC system as part of the job, not an afterthought.

  • ✓ Odor Gone at the Source
  • ✓ Soot Removed Without Spreading
  • ✓ Insurance Documentation Done Right
  • ✓ Air You Can Breathe Again
What's included

What Our Smoke Damage Restoration Covers

Every job starts with an assessment and a written scope. From there, we build the work around what your home actually needs. Here is what is included in a standard smoke damage restoration scope, and what we quote separately if the damage calls for it.

✓

Full Soot and Residue Removal

We HEPA vacuum every surface, then lift the film with chemical sponges and degreasers rated for smoke residue. Ceilings, walls, trim, cabinets, and light fixtures are all included. We work top-down so soot does not fall onto clean surfaces.

✓

Odor Treatment and Air Scrubbing

Hydroxyl generators and air scrubbers run for 24 to 72 hours depending on cubic footage and how far the smoke traveled. Charcoal odor absorbers go into closets, cabinets, and drawers. We re-test before we call the job done.

✓

HVAC System Cleaning

Smoke travels through ducts and settles in the air handler. We clean the accessible ductwork, replace filters, and treat the system so the first time you run the heat, you are not re-smelling the fire. This is often the difference between odor gone and odor coming back.

✓

Surface Sealing and Encapsulation

After soot removal, we apply smoke sealant primer to framing and encapsulant to subfloor and other porous surfaces. That step locks in any residue the sponge could not reach and keeps odor from resorbing into the material months later.

✓

Insurance Documentation Package

Photo log, moisture and soot readings, and an Xactimate estimate built by a certified estimator. We hand it over in a format your adjuster can read, which shortens the claim cycle and reduces the chance of a disputed line item.

✓

Final Walkthrough and Re-Test

We walk every room with you, point out what was cleaned and what was replaced, and re-test air quality before we pull off site. If structural repairs are needed, we schedule them before we leave so you are not left with an open wall.

How it works

What to Expect From Start to Finish

01

Emergency Call and Assessment

You call (833) 929-6186 and we ask what burned, how far the smoke traveled, and whether the power is on. A technician arrives with a thermal imaging camera and moisture meter to map the damage. We give you a written scope and a start time, usually within the same day.

02

Board-Up and Safety Check

If windows or doors were opened by the fire crew, we secure them. We check for water damage from firefighting, shut off affected HVAC runs, and set up containment with plastic and negative air machines so soot does not migrate into clean rooms while we work.

03

Soot and Residue Removal

We start at the ceiling and work down. HEPA vacuums pull loose soot, chemical sponges lift the film, and drywall saws and pry bars remove material that is too far gone. Charred framing and melted wiring get flagged for the structural repair phase. Most single-room jobs take one to two days.

04

Odor Treatment and Air Cleaning

Once surfaces are clean, we run hydroxyl generators and air scrubbers for 24 to 72 hours depending on how deep the smoke traveled. Charcoal odor absorbers go into closets and cabinets. We do not leave until a sniff test and particle count confirm the air is clear.

05

Final Walkthrough and Claim Handoff

We walk every room with you, point out what was cleaned and what was replaced, and hand over the photo log and Xactimate estimate for your adjuster. If structural repairs are needed, we schedule them before we pull off the site so you are not left with an open wall.

Tools & methods

Tools and Methods We Use on Every Job

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal Imaging Camera

Maps smoke trails and hot spots behind walls and in attics. It shows us where smoke traveled so we clean the whole path, not just the visible damage.

HEPA Vacuum

Traps soot particles down to 0.3 microns. We vacuum every surface before we wipe, so we lift residue instead of smearing it deeper into drywall and wood.

Air Scrubber and Negative Air Machine

Cycles the full volume of your home every few hours and keeps soot from migrating into clean rooms. We run them for the full job, not just the first day.

Hydroxyl Generator and Ozone Generator

Breaks down smoke odor molecules at the source. Hydroxyl units are safe for occupied spaces; ozone units run in unoccupied zones with posted warnings and a full air-out before re-entry.

Industrial Dehumidifier and Air Mover

Dries the water firefighting left behind. We do not start smoke work until the structure is dry, because trapped moisture turns into mold within 48 to 72 hours.

Drywall Saw and Pry Bar

Removes drywall and trim that smoke has penetrated too deeply to clean. We cut clean lines so the repair patch is small and the rebuild is straightforward.

Moisture Meter

Reads moisture content in drywall, lumber, and subfloor. It tells us which materials can be saved and which need to come out before mold sets in.

Real results

Before and after.

Kitchen Fire in Sunland-Tujunga

Before

A grease fire scorched the cabinets and sent smoke through the living room and two bedrooms. Soot coated the walls, the range hood was caked with residue, and the smell was strong enough that the family was sleeping in the garage.

After

We contained the kitchen, HEPA vacuumed every surface, and cleaned the range hood duct. Cabinets were saved with smoke sealant primer instead of replaced. Air scrubbers ran for 48 hours, and the family was back in their bedrooms on day four.

Attic Fire in Shadow Hills

Before

An attic fire burned through insulation and left smoke in the rafters. Two other companies quoted a full roof deck replacement. The homeowner wanted a second opinion before committing to that scope.

After

Thermal imaging showed the smoke path was limited to one side of the attic. We removed saturated insulation, treated the framing with encapsulant, and replaced only the damaged shingles. The roof deck was saved, and the cost came in under half the other quotes.

Apartment Fire on Sunland Boulevard

Before

A fire in one unit affected three apartments through shared walls and HVAC. Two neighboring tenants were displaced, and the property manager was coordinating three separate insurance claims.

After

We tested all three units, treated the two neighbors alongside the source unit, and separated documentation by unit. Two of the three units were re-occupied within a week, and the property manager had one point of contact for the whole job.

Problems we solve

Smoke Problems We Solve in Sunland Homes

Smoke damage shows up in ways most homeowners do not expect. Here are the problems we see most often in the Sunland area and how we handle each one.

Ask a pro →
01

Smoke odor lingering weeks after the fire

We use hydroxyl generators and ozone treatment sized to your home's cubic footage, then seal porous surfaces with encapsulant. We re-test air quality before we leave. If the odor returns within our warranty window, we come back at no charge.

↗
02

Soot residue on walls and ceilings

We HEPA vacuum first, then lift residue with chemical sponges and degreasers rated for smoke. We work top-down and seal off clean rooms with negative air machines so soot does not migrate while we clean.

↗
03

Water damage from firefighting

We extract standing water, set industrial dehumidifiers and air movers, and monitor moisture daily. We do not start smoke work until the structure is dry, because cleaning a wet wall just traps moisture behind the paint.

↗
04

Smoke damage to HVAC system

We clean accessible ductwork, replace filters, and treat the air handler. We also check the HVAC run for smoke trails with a thermal imaging camera. That step is what keeps the odor from coming back the first cold night.

↗
Proof you can check

Licensed, Certified, and Accountable

✓
IICRC Fire and Smoke Restoration Technician (FSRT)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC Odor Control Technician (OCT)Institute of Inspection, Cleaning and Restoration Certification
✓
California Contractors State License Board (CSLB) LicenseCalifornia Contractors State License Board
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
✓
Xactimate Certified EstimatorXactware
Good questions

Smoke Damage Questions Sunland Homeowners Ask

(833) 929-6186 →

Most smoke damage restoration jobs in SUNLAND run $1,200 to $6,500 in 2026, depending on square footage and how far the smoke traveled. A single-room kitchen fire with light soot usually lands near the low end. Whole-house smoke that reached the attic and HVAC system pushes toward the high end. We give you a written scope before we start, and we build the estimate in Xactimate so your insurance adjuster can review it line by line.

Fire Damage Restoration Sunland does. We are based in the Sunland area and cover Sunland-Tujunga, Shadow Hills, La Tuna Canyon, Verdugo Hills, and the Sunland Boulevard Corridor. Call (833) 929-6186 and we will confirm a window, usually same day for emergencies. We are licensed through the California Contractors State License Board and carry IICRC FSRT certification on every smoke job.

Yes, most smoke damage is restorable if you act within the first week or two. Drywall, wood framing, and finished surfaces usually clean up with HEPA vacuuming and chemical sponges. Porous materials like insulation, ceiling tiles, and some fabrics often need replacement. We test each surface before deciding, so you are not paying to replace something that can be saved. The sooner you call, the more of your home stays original.

A single-room job typically takes two to four days from assessment to final walkthrough. Whole-house jobs with attic or HVAC involvement run five to ten days, mostly because odor treatment needs 24 to 72 hours of generator run time. Structural repairs after fire, if needed, add time on a separate schedule. We give you a day-by-day timeline before we start so you can plan where to stay.

Ready when you are

Get Smoke Damage Restoration in SUNLAND, California Today

Smoke residue gets harder to remove every day it sits. Call (833) 929-6186 and we will schedule a same-day assessment, give you a written scope, and start work as soon as you approve it. Licensed, insured, and available 24/7 across the Sunland area.

Call Now (833) 929-6186 →
Request an appointment

Contact Our SUNLAND Fire Damage Restoration Team

Call (833) 929-6186 any hour of the day or night and a real person picks up. We dispatch crews 24/7 across SUNLAND and the surrounding foothills, and most calls get a technician on site within 60 to 90 minutes. If you prefer email, send photos and your address to info@firedamagerestorationsunland.com and we will follow up the same day.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186