We pull smoke, soot and char out of the pieces you thought were gone.

Fire-Damaged Furniture Restoration in SUNLAND, California

Fire-Damaged Furniture Restoration in SUNLAND, California is the work of saving upholstered, wood and antique pieces after a house fire instead of hauling them to the curb. We handle fire damaged furniture restoration SUNLAND homeowners call about most: smoke-saturated sofas, scorched dining sets, water-stained dressers from the firefight. Our technicians treat each piece in place or in our shop, and we document everything for your insurance claim.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Fire Damage Restoration Sunland — your local Fire Damage Restoration team
Careful work. Honest options.
About this service

What Fire-Damaged Furniture Restoration in SUNLAND, California Involves

Fire-Damaged Furniture Restoration in SUNLAND, California is a piece-by-piece salvage process, not a wipe-down. Soot is acidic and keeps eating fabric and finish until it is neutralized, so we start with a HEPA vacuum and dry-sponge pass, then match the cleaning method to the material: solvent gels on lacquered wood, low-moisture foam on wool upholstery, wet cleaning only where the weave can take it. Charred edges get sanded and stabilized, smoke odor gets sealed or extracted at the source, and frames are checked for heat distortion before anything goes back in your living room.

Most of the furniture we see in SUNLAND comes out of kitchen and attic fires where smoke traveled through the whole house before the trucks arrived. Upholstery foam acts like a sponge for soot particles, and the water from firefighting adds a second problem: swelling joints and mold risk within 48 to 72 hours. That is why we run moisture meters on every wood frame and treat fire damaged furniture restoration services SUNLAND California customers need as a race against secondary damage, not a cosmetic touch-up.

  • ✓ Insurance-Friendly Documentation
  • ✓ Smoke Odor Pulled at the Source
  • ✓ Wood and Finish Saved
  • ✓ Fast Turnaround After the Fire
What's included

What Fire-Damaged Furniture Restoration Includes

Every job starts with a written scope, and the inclusions below are part of that scope. If a piece needs something beyond this list, we tell you before we start and price it separately so there are no surprises on the invoice.

✓

Piece-by-Piece Assessment

We tag and grade every piece on site, photograph it, and note material, damage type and restorability. You get that inventory in writing, which doubles as documentation for your insurance claim.

✓

Soot and Residue Removal

HEPA vacuuming, dry sponge cleaning and material-specific solvents lift soot without driving it deeper. We match the method to the surface: solvent gels on finished wood, low-moisture foam on wool and delicate upholstery.

✓

Odor Neutralization

Ozone generators, hydroxyl generators and thermal fogging oxidize smoke molecules trapped in foam and fabric. Treatment runs 12 to 48 hours in a sealed chamber, and we re-check odor with you at delivery.

✓

Wood Repair and Refinishing

Charred edges are sanded back to sound wood, patched, sealed with smoke sealant primer and refinished to blend. Joints that swelled from firefighting water are dried and re-glued before finish work.

✓

Pack Out, Storage and Return

Pieces that need shop work are wrapped, logged and stored in our controlled facility while your structure repairs happen. We deliver them back, place them where they were, and do a final walkthrough with you.

How it works

How Our Furniture Restoration Process Works

01

On-Site Assessment

We walk the house with you, tag each piece and grade it: restore, uncertain, or replace. A thermal imaging camera checks for hidden heat damage and moisture meters read the wood frames. This usually takes 45 to 90 minutes and you get a written scope the same day.

02

Stabilize and Pack Out

Loose soot gets HEPA-vacuumed on site so it does not spread. Pieces that need shop work are wrapped, logged and moved to our controlled facility. Anything with active mold or standing water gets separated and treated first so cross-contamination does not hit the clean furniture.

03

Clean and Deodorize

Each piece gets the method its material calls for: dry sponge and solvent on wood, foam cleaning on upholstery, ultrasonic cleaning on hardware and small parts. Ozone generators and hydroxyl generators run in sealed chambers for 12 to 48 hours depending on how deep the smoke penetrated.

04

Repair and Refinish

Charred edges are sanded, patched and sealed with smoke sealant primer. Joints that swelled from firefighting water are dried with industrial dehumidifiers and air movers, then re-glued. Finish work is blended by hand so the repair does not read as a patch.

05

Deliver and Reset

We bring pieces back, place them where they were, and do a final odor check with you in the room. If anything still smells or a finish does not match, it goes back to the shop at no extra charge. Most jobs close out within 5 to 10 business days.

Tools & methods

Tools and Methods We Use on Fire-Damaged Furniture

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal Imaging Camera

Finds hidden heat damage and moisture inside frames and upholstery before we commit to restoring a piece.

HEPA Vacuum

Lifts fine soot particles without spreading them into the air or driving them deeper into fabric.

Ozone and Hydroxyl Generators

Oxidize smoke molecules trapped in foam and fabric inside sealed treatment chambers.

Industrial Dehumidifier and Air Movers

Dry wood frames and upholstery soaked by firefighting water before mold growth after fire sets in.

Moisture Meter

Reads moisture content in wood so we know which joints need drying before re-gluing and refinishing.

Dri-Air and Phoenix Restoration Equipment

Drying and air treatment equipment we run in the shop and on site for contents packs.

Real results

Before and after.

Smoke-Saturated Sofa in Sunland-Tujunga

Before

A three-seat sofa sat in a house with a kitchen fire two rooms away. The fabric was gray with soot, the foam smelled like a campfire, and the homeowner had already scheduled a bulk pickup.

After

HEPA vacuum and foam cleaning lifted the soot, and 36 hours of ozone treatment in a sealed chamber removed the odor. The sofa was back in the living room in five days at a fraction of the $2,100 replacement cost.

Charred Dining Table in McGroarty Terrace

Before

An electrical fire charred the edge of a walnut dining table and left sticky soot on the chairs. The finish was etched in two spots and the homeowner assumed the set was a loss.

After

We sanded the char back to sound wood, patched and sealed with smoke sealant primer, and refinished to blend. The chairs were solvent-cleaned. The set was delivered in seven days, and the repair is invisible from a foot away.

Water-Swollen Dresser in Sunland Park

Before

Firefighting water soaked a dresser through the back panel, and the joints were starting to swell within two days. Mold growth after fire was visible on the plywood back.

After

We separated the piece, treated the mold, dried the frame with industrial dehumidifiers and air movers over four days, then re-glued the joints and refinished the top. The dresser was saved for about 40 percent of replacement cost.

Problems we solve

Furniture Problems We Solve After a Fire

Most furniture loss after a fire is not from the flames. It is from soot, smoke odor and water damage that nobody addressed in time. These are the problems we hear about most in SUNLAND.

Ask a pro →
01

Smoke odor that comes back weeks later

We treat odor at the source with ozone and hydroxyl generators in a sealed chamber, plus thermal fogging where foam is saturated. That oxidizes the molecules instead of masking them, and we re-check with you at delivery.

↗
02

Soot etching the finish on wood furniture

We HEPA-vacuum and dry-sponge soot off first, then use solvent gels matched to the finish. Getting to it early is why we push for same-day assessments on fire damaged furniture restoration in SUNLAND.

↗
03

Swollen joints and mold after firefighting water

We read moisture with meters, dry frames with industrial dehumidifiers and air movers, and treat any mold before it spreads. Pieces with active mold are separated so they do not contaminate the rest.

↗
04

Insurance adjusters undervaluing contents

We write the scope in Xactimate, the platform most carriers use, with line-item costs and photos. That gives your adjuster something concrete to approve and reduces back-and-forth.

↗
Proof you can check

Licensed, Certified and Documented

✓
IICRC Fire and Smoke Restoration Technician (FSRT)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC Odor Control Technician (OCT)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
✓
California Contractors State License Board (CSLB) LicenseCalifornia Contractors State License Board
✓
Xactimate Certified EstimatorVerisk
Good questions

Frequently Asked Questions

(833) 929-6186 →

Most single-piece jobs run $150 to $850 in 2026, with a typical sofa or dining set landing around $300 to $600. Full contents packs from a house fire can run $2,000 to $6,000 depending on piece count. Cost drivers are material type, how deep the smoke penetrated, and whether refinishing is needed. We give you a written scope before any work starts.

Yes, most solid wood, upholstered and metal furniture can be restored if the char is surface-level and the frame has not lost structural strength. Pieces with deep char through a load-bearing joint, melted synthetic foam, or active mold are usually better replaced. We grade every piece on site and tell you which category it falls into before you commit.

A single piece usually takes 3 to 7 business days from pickup to delivery. Full contents from a house fire run 10 to 21 days depending on piece count and how long the structure work takes. Ozone and hydroxyl treatment alone takes 12 to 48 hours, and refinishing adds 2 to 4 days per piece.

Fire Damage Restoration Sunland handles furniture fire damage repair in SUNLAND and the surrounding foothill neighborhoods, with 24/7 phone coverage at (833) 929-6186. We are IICRC certified, licensed through the California Contractors State License Board, and we scope jobs in Xactimate so your insurance claim moves faster. Call and we can usually assess the same day.

Ready when you are

Get Fire-Damaged Furniture Restoration in SUNLAND, California Started Today

Soot and smoke odor get harder to remove every day a piece sits. Call (833) 929-6186 and we will assess your furniture the same day, give you a written scope, and tell you honestly what can be saved. Licensed, insured, IICRC certified.

Call for Same-Day Assessment (833) 929-6186 →
Request an appointment

Contact Our SUNLAND Fire Damage Restoration Team

Call (833) 929-6186 any hour of the day or night and a real person picks up. We dispatch crews 24/7 across SUNLAND and the surrounding foothills, and most calls get a technician on site within 60 to 90 minutes. If you prefer email, send photos and your address to info@firedamagerestorationsunland.com and we will follow up the same day.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186