Soot, smoke, and structural cleanup handled by a local crew.

Fire and Smoke Damage Restoration in SUNLAND, California

Fire and Smoke Damage Restoration in SUNLAND, California, starts with a fast assessment and ends with a home you can live in again. We pull soot off surfaces, neutralize smoke odor at the source, and repair charred framing before secondary damage sets in. If you're searching for fire and smoke damage restoration services SUNLAND California homeowners trust, call (833) 929-6186 and we'll walk you through the next step.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Fire and Smoke Damage Restoration
Careful work. Honest options.
About this service

What Fire and Smoke Damage Restoration in SUNLAND, California Involves

Fire and Smoke Damage Restoration in SUNLAND, California is the process of removing soot, neutralizing smoke residue, drying water left behind by firefighting, and rebuilding the structural damage a fire leaves in its wake. It is not just cleaning walls. Smoke pushes into wall cavities, attic insulation, and HVAC ducts, and the acidic soot starts etching metal and dulling finishes within hours. We use thermal imaging cameras to find hidden hot spots and moisture meters to map water intrusion before mold has a chance to take hold.

Most SUNLAND calls we run come from kitchen fires, electrical fires in older knob-and-tube wiring, and attic fires that start in recessed lighting. Foothill winds push smoke through a house faster than most people expect, and the dry Santa Ana conditions each fall make soot settle deep into porous materials. If you need emergency fire and smoke damage restoration SUNLAND California residents can reach around the clock, we answer 24/7 and dispatch a crew that knows the difference between a surface wipe-down and a full smoke remediation.

  • ✓ Stop Secondary Damage
  • ✓ Odor Gone at the Source
  • ✓ Insurance-Ready Documentation
  • ✓ Rebuild Under One Roof
What's included

What Fire and Smoke Damage Restoration Includes

Every job is scoped to the actual damage, but the core of fire and smoke damage restoration covers assessment, emergency stabilization, soot and smoke removal, odor treatment, and structural rebuild. Here is what is typically included in a standard scope.

✓

Emergency Board-Up and Tarp

Open roofs, broken windows, and compromised doors get secured before anything else. We use plywood, roofing shingles, and tarps to keep weather and pests out while the job is underway.

✓

Water Extraction and Drying

Firefighting water sits in carpets, subfloor, and wall cavities. We extract it, set industrial dehumidifiers and air movers, and monitor with moisture meters until the structure reads dry.

✓

Soot and Residue Removal

HEPA vacuums, chemical sponges, and drywall saws get the soot off surfaces and out of cavities. We pull charred insulation and framing that cannot be saved and bag it for disposal.

✓

Odor Neutralization

Air scrubbers, hydroxyl generators, and ozone treatment oxidize smoke molecules in the air and in porous materials. HVAC ducts get cleaned and sealed so odor does not recirculate.

✓

Structural Rebuild

New drywall, insulation, lumber, and paint go back in. Roofing and electrical get repaired by licensed trades. We finish with a smoke sealant primer and a final walkthrough with you.

How it works

Our Fire and Smoke Restoration Process

01

Emergency Assessment

We arrive, secure the property, and walk every room with a thermal imaging camera and moisture meter. You get a written scope the same day that separates emergency work from rebuild work, so you know what happens first and what your insurance will see.

02

Board-Up and Water Extraction

Open roofs, broken windows, and compromised doors get boarded or tarped before anything else. Then we extract standing water from firefighting, set industrial dehumidifiers and air movers, and monitor daily until framing reads dry on the meter.

03

Soot and Smoke Removal

Dry soot comes off first with HEPA vacuums. Wet soot and oily residue get chemical sponges and Fiberlock-compatible cleaners. We pull charred drywall and insulation with a drywall saw and pry bar, then HEPA-vacuum the cavities before any rebuild begins.

04

Odor Neutralization

Air scrubbers run continuously while hydroxyl generators or ozone treat the structure. HVAC ducts get cleaned and sealed. Porous materials that cannot be saved come out. This stage usually takes 24 to 72 hours depending on square footage and how deep the smoke traveled.

05

Rebuild and Final Walkthrough

New drywall, insulation, lumber, and paint go back in. Roofing shingles and melted wiring get replaced by licensed trades. We seal with a smoke sealant primer, do a final odor check with you in the room, and hand back a clean, dry, code-correct home.

Tools & methods

Tools and Methods We Use on Every Job

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal Imaging Camera

Finds hidden hot spots in walls and ceilings and maps moisture from firefighting water before we open anything up.

HEPA Vacuum

Captures fine soot particles without blowing them back into the air. Used on every surface before wet cleaning starts.

Air Scrubber

Runs continuously during demolition and drying to filter smoke particles and keep the air breathable for the crew and the homeowner.

Hydroxyl Generator

Oxidizes smoke odor molecules safely in occupied spaces. Runs 24 to 72 hours depending on square footage and smoke penetration.

Ozone Generator

Used in unoccupied spaces for heavy odor loads. Stronger than hydroxyl and requires the space to be cleared during treatment.

Industrial Dehumidifier and Air Mover

Dries framing, subfloor, and wall cavities after water extraction. Monitored daily with moisture meters until the structure reads dry.

Drywall Saw and Pry Bar

Opens wall cavities to access charred framing and smoke-saturated insulation. Controlled demolition, not guesswork.

Real results

Before and after.

Kitchen Grease Fire, Sunland-Tujunga

Before

A grease fire scorched the cabinets, range hood, and ceiling. Soot covered the kitchen and drifted into the living room and hallway. The smell was strong enough that the family was staying with relatives.

After

We pulled the charred cabinets and drywall, HEPA-vacuumed and degreased every surface, ran hydroxyl treatment for 48 hours, and rebuilt the kitchen with new cabinets, drywall, and paint. The family moved back in on day 9.

Attic Fire, Shadow Hills

Before

Recessed lighting wiring started a fire that burned through insulation and roof sheathing before the fire department knocked it down. The attic was charred, the roof was open, and water from firefighting had soaked the ceiling below.

After

We tarped the roof the same day, removed the burned insulation and framing, dried the ceiling cavity, and rebuilt with new lumber, insulation, and roofing shingles. Electrical was replaced and inspected before power was restored. The job took 5 weeks including permits.

Electrical Fire, Sunland Boulevard Corridor

Before

An electrical fire in a 1940s home burned through a bedroom wall and sent smoke through the HVAC system. Soot coated the walls in two bedrooms and the hallway, and the smell was in every room.

After

We isolated the circuit, documented the wiring damage for the adjuster, removed the charred drywall, cleaned the ducts, and treated the whole house with hydroxyl generators. New drywall, paint, and a smoke sealant primer finished the job. The family was back in 12 days.

Problems we solve

Fire and Smoke Problems We Solve in SUNLAND

The fire is the obvious problem. The ones that follow are the ones that cost you more if they are not handled right. Here are the issues we see most often and how we handle them.

Ask a pro →
01

Smoke odor that keeps coming back

We treat the source, not the air. Hydroxyl generators and ozone oxidize the molecules, air scrubbers pull them out of circulation, and a smoke sealant primer locks rebuilt surfaces so odor does not return on the next hot day.

↗
02

Soot residue etching metal and finishes

We HEPA-vacuum dry soot first, then use chemical sponges and Fiberlock-compatible cleaners on wet or oily residue. The faster we neutralize it, the more of your finishes and appliances survive.

↗
03

Water damage from firefighting

We extract standing water, set industrial dehumidifiers and air movers, and monitor with moisture meters daily. Framing gets dried to spec before rebuild starts, so mold never gets a foothold.

↗
04

Melted wiring and compromised electrical

We isolate affected circuits, document the damage for your adjuster, and coordinate licensed electrical repair before any power is restored. Structural rebuild waits until the electrical sign-off is in hand.

↗
Proof you can check

Licensed, Certified, and Accountable

✓
IICRC Fire and Smoke Restoration Technician (FSRT)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC Odor Control Technician (OCT)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
✓
Xactimate Certified EstimatorVerisk
✓
California Contractors State License Board (CSLB) LicenseState of California
Good questions

Frequently Asked Questions About Fire and Smoke Damage Restoration

(833) 929-6186 →

Most SUNLAND fire and smoke jobs run $3,200 to $18,000 in 2026, with the average whole-room cleanup landing around $6,500. Small kitchen fires with limited soot often come in under $4,000. Whole-house jobs with structural rebuild, HVAC cleaning, and contents pack-out push toward the top of the range. Insurance usually covers the bulk of it, and we build the scope in Xactimate so your adjuster can review it line by line.

We do. Fire Damage Restoration Sunland is a local crew based here, licensed through the California Contractors State License Board, and we cover Sunland-Tujunga, Shadow Hills, La Tuna Canyon, and the surrounding foothill neighborhoods. Call (833) 929-6186 and we will confirm a window, usually same day for emergencies. We handle both the cleanup and the rebuild, so you are not coordinating three different trades.

Yes, most of it can. Drywall, insulation, and charred framing get replaced, but hardwood floors, cabinetry, and furniture are often restorable with HEPA vacuuming, chemical sponges, and ozone or hydroxyl treatment. The key is speed. Soot etches metal and finishes within 48 to 72 hours, and mold can start in wet wall cavities within a week. The faster we get in, the more of your home we can save.

A single-room kitchen fire typically takes 5 to 10 days from board-up to final walkthrough. Whole-house jobs with structural repair run 4 to 12 weeks depending on permit timelines and material availability. Odor treatment alone takes 24 to 72 hours. We give you a written schedule after the assessment and update it as the job moves, so you know when you can move back in.

Ready when you are

Get Fire and Smoke Damage Restoration in SUNLAND, California Today

Soot and smoke do not stop working while you wait. Call (833) 929-6186 and we will dispatch a certified crew to assess the damage, board up what needs it, and give you a written scope the same day. Licensed, insured, and answering 24/7.

Call Now (833) 929-6186 →
Request an appointment

Contact Our SUNLAND Fire Damage Restoration Team

Call (833) 929-6186 any hour of the day or night and a real person picks up. We dispatch crews 24/7 across SUNLAND and the surrounding foothills, and most calls get a technician on site within 60 to 90 minutes. If you prefer email, send photos and your address to info@firedamagerestorationsunland.com and we will follow up the same day.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186