Soot, smoke and structural damage handled before your doors reopen

Commercial Fire Restoration in SUNLAND, California

Commercial Fire Restoration in SUNLAND, California is the trade that turns a fire-damaged storefront, office or warehouse back into a safe, insurable, open-for-business property. We handle soot removal, smoke odor, water from firefighting and structural repair under one crew. If you run a business on Foothill Boulevard or anywhere in the Sunland-Tujunga area, call (833) 929-6186 and we will be on site the same day.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Fire Damage Restoration Sunland serving SUNLAND, California
Careful work. Honest options.
About this service

What Commercial Fire Restoration in SUNLAND, California Covers

Commercial Fire Restoration in SUNLAND, California is the full-scope trade of stabilizing, cleaning and rebuilding a business property after a fire. That means board-up and roof tarping first, then soot removal with HEPA vacuums and chemical sponges, smoke odor control with hydroxyl generators and ozone generators, water extraction from firefighting lines, and structural repair of charred framing, melted wiring and roof damage from fire. We document every room with a thermal imaging camera and moisture meter so your insurance claim matches the actual damage.

Local businesses here deal with a specific set of fire scenarios. Older masonry buildings along the Sunland Boulevard Corridor trap smoke odor in plaster and ductwork for months. Attic fires in Sunhill Estates spread fast through dry lumber and thermal insulation. And because the foothills stay dry from late spring through fall, a small kitchen fire can climb a wall cavity before the sprinklers catch it. That is why business fire damage restoration SUNLAND owners call for has to start the same day, not the same week.

  • ✓ Same-Day Board-Up
  • ✓ Odor Gone, Not Masked
  • ✓ Insurance-Ready Documentation
  • ✓ One Crew, One Schedule
What's included

What Our Commercial Fire Restoration Includes

Every commercial fire restoration job we take on covers the full path from emergency board-up to final walkthrough. The inclusions below are standard on every scope. If your property needs something outside this list, such as asbestos abatement or a full roof replacement, we will tell you upfront and price it separately before any work begins.

✓

Emergency Board-Up and Tarping

We secure windows, doors and roof openings the same day you call. This stops rain intrusion, looting and further smoke damage to HVAC system components while the restoration scope gets approved.

✓

Soot and Residue Removal

HEPA vacuuming, chemical sponge scrubbing and disposal of contaminated material. We clean walls, ceilings, fixtures, ductwork and inventory that can be saved, and document what cannot.

✓

Smoke Odor Neutralization

Hydroxyl generators for occupied areas, ozone generators for sealed rooms, charcoal odor absorbers for enclosed spaces. We finish with encapsulant and smoke sealant primer on rebuilt surfaces.

✓

Water Extraction and Drying

Firefighting water gets extracted with truck-mount units, then structural cavities get dried with industrial dehumidifiers and air movers. This is the step that prevents mold growth after fire.

✓

Structural Repair and Rebuild

Charred framing, drywall, insulation, lumber and roofing shingles replaced to code. We pull permits, coordinate inspections and finish with fire retardant coatings on exposed structural members.

✓

Insurance Documentation

Photos, moisture readings and Xactimate line items for every affected surface, submitted directly to your adjuster. We join three-way calls with you and your carrier to settle scope questions fast.

How it works

How Our Commercial Fire Restoration Process Works

01

Emergency Response

We answer the phone 24/7 and roll a crew to your property, typically within 60 to 90 minutes in the Sunland area. First job is safety: we shut off utilities if needed, board up openings and tarp the roof. You get a written scope and photos before we touch anything.

02

Damage Assessment

A technician walks the building with a thermal imaging camera and moisture meter, mapping char, hidden heat damage and water from firefighting. We check the HVAC system for smoke damage, test drywall for structural fire damage and photograph everything for your adjuster.

03

Soot and Smoke Removal

Crews HEPA-vacuum every surface, then hand-scrub soot residue off walls, ceilings and fixtures with chemical sponges. Air scrubbers and negative air machines run the whole time so loosened particles leave the building instead of settling back on your inventory.

04

Odor and Water Control

Hydroxyl generators run continuously in occupied areas; ozone generators handle sealed, empty rooms. Industrial dehumidifiers and air movers pull moisture out of subfloors and wall cavities, which is what prevents mold growth after fire. This phase usually runs three to seven days.

05

Rebuild and Walkthrough

We replace charred framing, drywall, insulation and roofing shingles, then seal with fire retardant coatings and smoke sealant primer. Final walkthrough covers every room with you, plus a written warranty on workmanship. Most commercial rebuilds finish in two to six weeks depending on permit timelines.

Tools & methods

Equipment and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal Imaging Camera

Finds hidden heat damage behind walls, in ceilings and around electrical panels before we open anything up. It also locates moisture from firefighting that a visual inspection would miss.

HEPA Vacuum and Air Scrubber

Captures fine soot and smoke particles instead of pushing them around. Air scrubbers run continuously during cleaning so loosened particles leave the building.

Hydroxyl and Ozone Generators

Hydroxyl generators neutralize smoke odor in occupied areas; ozone generators handle sealed, empty rooms. We match the method to the space so the treatment actually works.

Industrial Dehumidifier and Air Mover

Dri-Eaz and Phoenix Restoration Equipment units pull moisture out of subfloors and wall cavities after firefighting water. Daily moisture meter readings confirm the structure is dry.

Negative Air Machine

Creates pressure differentials that keep soot and smoke particles contained to the work area, which matters in multi-tenant buildings where other businesses stay open.

Drywall Saw, Pry Bar and Sledgehammer

Opens wall cavities where thermal imaging shows heat damage. Controlled demolition lets us replace charred framing and insulation without disturbing unaffected structure.

Real results

Before and after.

Restaurant Hood Fire, Foothill Boulevard

Before

A hood fire sent grease-laden smoke through a 2,400-square-foot dining room. Ceiling tiles were saturated, the hood and ductwork were coated in sticky soot, and the smell was in every booth. The restaurant was closed with no reopening date.

After

We boarded up the same night, ran air scrubbers for 72 hours, degreased the hood and ductwork, replaced 340 ceiling tiles and sealed the dining room with smoke sealant primer. The restaurant reopened in 11 days with no detectable smoke odor.

Office Electrical Fire, Sunland Boulevard

Before

An electrical fire melted a panel and scorched about 40 feet of wall in a 1,800-square-foot office suite. Soot covered desks, file storage and the drop ceiling. The tenant had nowhere to work and the landlord needed documentation fast.

After

We coordinated the electrician for the panel replacement, opened the wall where thermal imaging showed heat damage, replaced charred framing and drywall, and repainted the suite. The tenant moved back in 19 days after the fire.

Warehouse Attic Fire, Roscoe Boulevard

Before

An attic fire spread through dry lumber and thermal insulation in a 9,000-square-foot warehouse. The roof was compromised, smoke pushed into the storage floor, and the owner was looking at a total loss on inventory.

After

We tarped the roof the same night, replaced 60 feet of charred framing, installed new roofing shingles and re-insulated to California energy code. Hydroxyl generators ran for six days until odor tests came back clean. The warehouse was fully operational in six weeks.

Problems we solve

Problems We Solve for SUNLAND Businesses

Most fire damage gets worse in the days after the fire, not during it. These are the problems we see most often when we arrive on a SUNLAND commercial job, and how we handle each one.

Ask a pro →
01

Smoke odor lingering in retail and office space

We find the source with thermal imaging and air sampling, then neutralize it with hydroxyl generators and ozone generators. Rebuilt surfaces get sealed with smoke sealant primer so odor does not return in summer heat.

↗
02

Soot residue etching metal and glass fixtures

Our crews HEPA-vacuum and hand-scrub soot residue off every surface within the first day on site. Fast removal is what saves fixtures, display cases and finished millwork from permanent damage.

↗
03

Water damage from firefighting sitting in subfloors

We extract standing water immediately, then dry structural cavities with industrial dehumidifiers and air movers. Moisture meter readings get logged daily until the structure is dry.

↗
04

Charred framing and melted wiring behind walls

We open wall cavities where thermal imaging shows heat damage, replace charred framing and coordinate a licensed electrician for melted wiring. Permits and inspections get pulled before the rebuild starts.

↗
Proof you can check

Licensed, Certified and Reviewed

✓
IICRC Fire and Smoke Restoration Technician (FSRT)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC Odor Control Technician (OCT)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
✓
California Contractors State License Board (CSLB) LicenseState of California
✓
Xactimate Certified EstimatorXactware
Good questions

Commercial Fire Restoration Questions, Answered

(833) 929-6186 →

Most commercial fire restoration jobs in SUNLAND run $8,000 to $60,000, with small retail or office cleanups near the low end and full structural rebuilds at the top. Square footage, soot spread, water damage from firefighting and whether the roof or framing needs replacement drive the number. We give you a written scope before work starts, and we bill insurance directly whenever the policy covers the loss.

We do. Fire Damage Restoration Sunland handles business fire damage restoration in SUNLAND, California, including board-up, soot removal, odor control and structural repair. We are based locally, serve Sunland-Tujunga, Shadow Hills, La Tuna Canyon and Verdugo Hills, and our crews are on site the same day you call (833) 929-6186.

Cleanup and odor control usually take 3 to 10 days, and full rebuild takes 2 to 6 weeks depending on permit timelines with the city. Small kitchen fire cleanups can wrap in under a week. Larger warehouse or multi-tenant jobs with structural fire damage and roof replacement run longer. We give you a written schedule after the first walkthrough.

Yes. We document every affected surface with photos, moisture readings and Xactimate line items, then submit the scope directly to your adjuster. We have worked with most major carriers and can join a three-way call with you and your adjuster to settle scope questions. You still approve the final scope before we start rebuilding.

Ready when you are

Get Your SUNLAND Business Back Open

We answer the phone 24/7 and dispatch a crew the same day. Our estimators are Xactimate certified, our technicians are IICRC certified, and our work is warrantied. Call (833) 929-6186 and we will walk your property with you before anything gets moved.

Call Now (833) 929-6186 →
Request an appointment

Contact Our SUNLAND Fire Damage Restoration Team

Call (833) 929-6186 any hour of the day or night and a real person picks up. We dispatch crews 24/7 across SUNLAND and the surrounding foothills, and most calls get a technician on site within 60 to 90 minutes. If you prefer email, send photos and your address to info@firedamagerestorationsunland.com and we will follow up the same day.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186